Why Is My Frigidaire Dishwasher Not Draining: Best Tips


Your Frigidaire dishwasher may not be draining due to clogs in the filter, drain hose, or garbage disposal. Check and clear these areas to resolve the issue.

A dishwasher that fails to drain is a frustrating problem that can lead to a smelly and unsanitary kitchen. If your Frigidaire dishwasher is not draining, there are a few common culprits that you can investigate to get things working again.

One possibility is that the filter system is clogged, which can prevent water from draining out of the tub. A blocked drain hose or a garbage disposal that is clogged with food waste can also be to blame. Read on to learn more about diagnosing and fixing a Frigidaire dishwasher that isn’t draining properly.

why is my frigidaire dishwasher not draining

Understanding The Drainage System Of Your Frigidaire Dishwasher

If you’re having issues with your Frigidaire dishwasher not draining, it can be a frustrating experience. However, understanding the drainage system is key before attempting any troubleshooting. Below, we’ll break down the essential components that make up the drainage system and explain how it works.

Overview Of The Parts That Make Up The Drainage System:

  • Drain pump: This is responsible for pumping water out of the dishwasher.
  • Drain hose: This helps to carry water away from the dishwasher.
  • Drain solenoid: This controls the drain valve and ensures that water flows in one direction.
  • Drain valve: This regulates water flow and ensures that it only flows in one direction.
  • Check valve: This prevents dirty water from flowing back into the dishwasher.
  • Float switch: This senses the water level in the dishwasher and can shut off the water supply if necessary.

Explanation Of How The Drainage System Works:

At the end of the dishwashing cycle, the drain pump is activated, pushing the water through the drain hose, and into the garbage disposal or sink drain. The water flows in a single direction, regulated by the drain valve and solenoid.

The check valve ensures that no dirty water flows back into the dishwasher. The float switch also plays a vital role by sensing the water level, as it can signal the water inlet valve to stop allowing water into the dishwasher.

Importance Of Understanding The Drainage System Before Proceeding With Troubleshooting Tips:

Before attempting to fix your Frigidaire dishwasher, it’s crucial to understand how the drainage system works. This knowledge can help identify potential issues and necessary repairs. Troubleshooting blindly can lead to damage or further issues, so save yourself the trouble by making sure you have all the necessary information to diagnose the problem.

Remember, a broken or malfunctioning component may not always be obvious unless you understand how the drainage system works.

Understanding the drainage system of your Frigidaire dishwasher is essential in troubleshooting issues. With the knowledge of the essential components and how they work together, you can identify potential problems before they happen and needed repairs. Follow these guidelines, and you’ll be well on your way to getting your dishwasher back to proper functioning.

Top Reasons Why Your Frigidaire Dishwasher Is Not Draining

Are you having trouble with your Frigidaire dishwasher? One common issue that homeowners face is a dishwasher that isn’t draining properly. There are numerous causes that can contribute to this problem, including insufficient water levels, clogged drainage systems, malfunctioning pump and motor assemblies, damaged or clogged drain hoses, and incorrectly installed water supply lines.

In this blog post, we’ll explore each of these potential causes in more detail.

Insufficient Water In The Dishwasher

If your Frigidaire dishwasher isn’t draining, it could be due to a lack of water within the unit. This problem can typically be fixed by performing the following steps:

  • Check the water valve to ensure that it’s fully open, allowing water to enter the dishwasher.
  • Verify that the unit is properly plugged in and receiving power.
  • If the dishwasher is running properly but still isn’t draining, add additional water manually to help the unit complete the cycle.

Blockage In The Drainage System

Another potential cause of dishwasher drainage issues is a blockage in the drainage system. Blockages can occur due to a variety of factors, including:

  • Food debris that has built up within the dishwasher’s drain.
  • A clogged sink drainpipe that prevents water from flowing out of the dishwasher.
  • A kinked or bent dishwasher drain hose that’s preventing water from draining properly.

To address a blocked drainage system, consider the following steps:

  • Check the dishwasher’s filter to ensure it’s not clogged with excess debris.
  • Clear any blockages from the sink’s drainpipe or dishwasher drain hose.
  • Straighten any kinks or bends in the dishwasher drain hose to allow for proper water flow.

Malfunctioning Pump And Motor Assembly

A malfunctioning pump and motor assembly can prevent your dishwasher from draining properly. In this case, the dishwasher will typically run through the entire cycle but leave a significant amount of water in the bottom of the unit. To diagnose and address this issue, consider:

  • Running a diagnostic cycle to test the dishwasher’s motor and pump.
  • Inspecting the dishwasher for any visible signs of damage or wear to the pump or motor assembly.
  • Replacing the pump and motor assembly entirely if necessary.

Damaged Or Clogged Drain Hose

If your Frigidaire dishwasher still isn’t draining properly, it could be due to a damaged or clogged drain hose. A number of issues can cause damage to the drain hose, including kinks, tears, and general wear and tear. To address this issue, consider:

  • Inspecting the drain hose for any visible signs of damage or blockages.
  • Clearing any debris from the hose by using hot water to flush it out.
  • Replacing the drain hose entirely if necessary.

Water Entering The Dishwasher Incorrectly

Finally, improper water supply can cause your Frigidaire dishwasher to not drain correctly. This issue can be caused by a variety of factors, including:

  • Incorrect installation of the water supply line.
  • A defective water inlet valve that’s preventing water from flowing into the dishwasher.

To address this issue, consider:

  • Inspecting the water supply line to ensure it’s installed properly.
  • Checking the water inlet valve for any visible signs of damage or wear.
  • Replacing the water inlet valve entirely if necessary.

There are a variety of reasons why your Frigidaire dishwasher might not be draining properly. Whether it’s due to insufficient water levels, a blocked drainage system, malfunctioning pump and motor assemblies, damaged or clogged drain hoses, or water entering the dishwasher incorrectly, it’s important to identify and address the problem quickly to ensure your dishwasher continues to run efficiently.

Troubleshooting Tips For A Frigidaire Dishwasher That Won’T Drain

A malfunctioning dishwasher is not only inconvenient but frustrating as well, and when it comes to a Frigidaire dishwasher that won’t drain, the situation couldn’t be more challenging. If you’re one of those homeowners who are currently experiencing this problem, don’t fret! In this section, we’ll go over some tips on how to troubleshoot a Frigidaire dishwasher that won’t drain.

Conducting A Visual Inspection Of The Dishwasher

Before getting into the technical aspects of the dishwasher, it’s best to conduct a preliminary visual inspection. Here are some things to look for:

  • Check to see if there is any kink or damage to the drain hose that may be causing a blockage.
  • Ensure that the dishwasher’s filter is not clogged with food debris or any other particles.
  • Inspect the garbage disposal if your dishwasher is connected to it, as this could also cause a blockage.

Cleaning The Filters In The Dishwasher

One common problem that could cause a Frigidaire dishwasher not to drain properly is a clogged filter. Here’s how to clean the filters:

  • Refer to your owner’s manual to know where the filters are located.
  • Remove the filters and carefully rinse them under hot water to remove any food debris.
  • Scrub the filters with a soft brush and mild soap to eliminate any stuck-on residue.
  • Rinse the filters again under hot water and leave them to dry completely before reattaching them to the dishwasher.

Checking The Drain Hose For Blockages

If cleaning the filters didn’t solve the problem, the issue may lie in a blocked drain hose. Here’s how to check and fix the dishwasher’s hose:

  • Look at the drain hose and check whether it has any blockages, twists, or damages.
  • If there are food particles clogging the hose, use a coat hanger or any long and thin object to dislodge the debris.
  • If the hose is damaged, replace it with a new one that’s compatible with your Frigidaire dishwasher.

Inspecting The Pump And Motor Assembly

If the above-mentioned troubleshooting steps don’t work, then the problem may be with the dishwasher’s pump and motor assembly. Here’s how to inspect the pump and motor assembly:

  • Turn off the power supply to the dishwasher.
  • Remove the dishwasher’s lower panel to gain access to the pump and motor assembly.
  • Check the pump and motor assembly for any kind of damage, blockages, or debris.
  • Clean the pump and motor assembly as needed. If there are any damages, replace the pump and motor assembly.

Remember to always refer to your owner’s manual before taking any action.

With these simple troubleshooting tips, you can resolve the problem of your Frigidaire dishwasher not draining and get back to your cleaning routine in no time.

Common Mistakes To Avoid When Troubleshooting Your Frigidaire Dishwasher Drainage Issues

Why is my Frigidaire dishwasher not draining – common mistakes to avoid when troubleshooting your Frigidaire dishwasher drainage issues

The last thing you want when it comes to cleaning the dishes is running into problems with your dishwasher. If you have a Frigidaire dishwasher that is not draining, it can be a frustrating experience. However, before you fret over the issue, take a step back, and avoid common mistakes that can complicate repair procedures.

Here are some of the most common mistakes that you should avoid when troubleshooting your Frigidaire dishwasher drainage issues.

Importance Of Turning Off The Power Before Troubleshooting

Before you start troubleshooting your dishwasher, one of the first things you should do is to turn off the power supply. Your dishwasher is connected to electricity, and without turning it off, the process of repair can be dangerous. Here are some key things to keep in mind:

  • To turn off the power, unplug the dishwasher from the electrical outlet.
  • If you can’t access the outlet, turn off the power from the circuit breaker box.
  • Double-check to confirm that the power is off by trying to turn on the dishwasher. If it doesn’t turn on, then it’s safe to proceed.

Do Not Force The Dishwasher To Drain

Sometimes, when your Frigidaire dishwasher is not draining, you may be tempted to try and force it to drain. This is a mistake as it can cause more damage to the dishwasher. Here are some important things to remember:

  • Don’t open the dishwasher mid-cycle and try to force it to drain. This can cause a safety hazard and damage your appliance.
  • Do not use drain cleaners as they can damage your dishwasher’s interior and void its warranty.
  • If the dishwasher shows error codes, follow the user manual to resolve the issue. Don’t try to force the dishwasher to work through the error.

Understanding The Limits Of Diy Repairs

While Diy can come handy in many instances, there are some limits to what it can achieve. When it comes to your Frigidaire dishwasher, some repairs require professional expertise. Here are some essential tips to consider:

  • Consult the user manual before attempting any repairs; some repairs are best left to professionals.
  • If the issue persists despite your diy efforts, it’s best to contact a certified appliance repair technician.
  • Attempting advanced repairs on non-functional parts such as a garbage disposal or circuit breaker can be dangerous and void your dishwasher’s warranty.

Importance Of Seeking Professional Help When Necessary

In some instances, you may need to seek the help of a professional when troubleshooting your Frigidaire dishwasher drainage problems. Here are some key points to keep in mind:

  • If your dishwasher has a warranty, contact the manufacturer or supplier to schedule a repair appointment.
  • Hiring a certified Frigidaire technician can save you money in the long run as they are familiar with the appliance model and have access to genuine replacement parts.
  • Seeking professional help can ensure that your dishwasher is repaired timely, accurately, and without compromising your safety.

When your Frigidaire dishwasher is not draining, it can be a frustrating experience. However, by avoiding common mistakes and seeking professional help when necessary, you can restore it to optimal functionality in no time. Remember, always put your safety first by adhering to the manufacturer’s user manual and turning off power before handling any repair procedures.

Frequently Asked Questions Of Why Is My Frigidaire Dishwasher Not Draining

Why Is Water Not Draining From My Frigidaire Dishwasher?

There are several possible reasons for this, including a clog in the drain hose, a faulty pump, or a malfunctioning motor.

How Can I Fix My Frigidaire Dishwasher That’s Not Draining?

First, try cleaning the drain hose and filter. If that doesn’t work, check the pump and motor for any issues.

Can A Clogged Garbage Disposal Cause My Frigidaire Dishwasher To Not Drain?

Yes, if your dishwasher is connected to your garbage disposal, a clog in it can lead to drainage problems.

Is It Safe To Use My Frigidaire Dishwasher If It’s Not Draining Properly?

No, it’s not safe to use a dishwasher that’s not draining properly. It can lead to leaks, poor cleaning, and other issues.

How Often Should I Clean My Frigidaire Dishwasher’s Drain Hose And Filter?

Experts suggest cleaning your dishwasher’s drain hose and filter every six months to prevent clogging and drainage problems.


It can be frustrating to deal with a dishwasher that won’t drain, but don’t despair. By troubleshooting the common causes of drainage problems, you may be able to solve the issue without requiring professional assistance. Always start with the simplest solution, such as cleaning the filter and removing any blockages in the drain hose.

If that doesn’t work, you can try examining the drain pump and valve for any blockages and testing the float switch. It’s essential to keep your dishwasher well-maintained to prevent drainage problems from occurring in the first place. Regularly clean the dishwasher and filter, and ensure that you are using the correct dishwasher detergent and loading the dishes correctly.

With proper maintenance and troubleshooting, you can help your frigidaire dishwasher to work efficiently and save money on repair costs.

Leave a Comment