Kenmore Washing Machine Not Draining: Troubleshooting Guide

Your trusty Kenmore washing machine is an essential appliance for keeping your clothes clean and fresh. However, when it starts to exhibit problems, such as not draining properly, it can quickly become a source of frustration. Understanding why your Kenmore washing machine is not draining is the first step in finding a solution and getting your laundry routine back on track.

In this article, we will explore common issues that can lead to drainage problems in Kenmore washing machines and provide practical solutions to address these concerns. Whether it’s a clogged drain hose, a malfunctioning pump, or a faulty lid switch, you’ll discover how to diagnose and resolve these issues, saving you time, money, and the hassle of dealing with a malfunctioning washing machine.

By the end of this guide, you’ll have the knowledge and confidence to troubleshoot and fix your Kenmore washing machine’s drainage issues, ensuring your laundry days run smoothly once again.

Check The Drain Hose

If your Kenmore washing machine is not draining, start by checking the drain hose for any kinks or obstructions. Straighten out any bends in the hose and remove any blockages, if present. This simple troubleshooting step can often resolve the issue and get your washing machine draining properly again.

When your Kenmore washing machine is not draining properly, one of the first things you should check is the drain hose. A clogged or improperly connected drain hose can prevent water from properly draining out of the machine, leading to issues with the washing cycle.

Here are a few steps to follow when inspecting the drain hose:

• Inspect the drain hose for clogs or bends. Look for any debris or objects that may be obstructing the flow of water through the hose. If you notice any clogs or bends, you will need to clear them out to ensure proper drainage.
• Ensure the hose is connected properly to the machine and the drain. Check that the drain hose is securely connected to both the washing machine and the drain pipe or standpipe. If the connection is loose, tighten it to prevent leaks and improve drainage.
• Clean out any debris from the hose. If you find any debris or lint inside the drain hose, remove it using a brush or by running water through it. Clearing out any blockages will help maintain proper water flow during the washing cycle.

Remember to always unplug the washing machine and turn off the water supply before inspecting or working on any components. By regularly checking and maintaining the drain hose, you can ensure that your Kenmore washing machine drains properly and avoid any potential drainage issues in the future.

Examine The Washer Drain System

Inspecting the washer drain system is crucial if your Kenmore washing machine is not draining properly. Check the drain hose for any kinks, twists, or blockages, and ensure it is straightened out. Remove the hose and clear any obstructions if necessary to improve drainage.

If you’re experiencing issues with your Kenmore washing machine not draining properly, it’s important to examine the washer drain system thoroughly. This will help you identify and resolve any blockages or clogs that may be causing the problem. Follow these steps to troubleshoot the drain system:

Check for any blockages or clogs in the drain pipe or pump.

• Inspect the drain hose for any kinks or bends that may be obstructing the flow of water.
• Remove the drain hose from both the washer and the household drain, and check for any debris or foreign objects that may have clogged the system.
• Ensure that the drain hose is properly connected and not loose or disconnected.
• If you have a front-loading washer, check the drain pump filter for any obstructions. This filter is usually located at the bottom of the washer, behind a panel or door.

Clean out any debris or foreign objects.

• Use a flashlight to inspect the drain pipe and pump for any visible debris or foreign objects. Remove anything that may be blocking the flow of water.
• Run water through the drain pipe to flush out any remaining debris or particles.
• If you find any small items, such as coins or buttons, these might be causing the clog. Remove them carefully.

Verify that the drain pump is functioning correctly.

• Start a drain or spin cycle on your washing machine and listen for any unusual noises coming from the drain pump. A malfunctioning drain pump may produce grinding or humming sounds.
• Check if the drain pump impeller is clogged or damaged. The impeller is a small fan-like component that helps pump water out of the washer.
• Make sure the drain pump is connected properly and securely. If it’s loose, reattach it following the manufacturer’s instructions.
• If you suspect that the drain pump is faulty, it may need to be replaced. Consult the appliance manual or contact a professional technician for assistance.

By following these steps and examining the washer drain system, you can troubleshoot and resolve the drainage issue with your Kenmore washing machine. Remember to always prioritize safety by unplugging the appliance before performing any inspections or repairs.

Test The Lid Switch

To test the lid switch on your Kenmore washing machine that is not draining, you can follow these steps. First, remove the lid switch and inspect it. Then, install a new drain switch and test it to see if it resolves the issue.

Understand the Function of the Lid Switch:

• The lid switch is an important component of a Kenmore washing machine, as it ensures the machine stops spinning when the lid is opened.
• When the lid switch is activated by closing the lid, it allows the machine to continue functioning, including draining the water.
• If the lid switch is faulty or not functioning properly, it can prevent the machine from draining water, leading to issues with the washing process.

Learn How to Diagnose a Faulty Lid Switch:

• If your Kenmore washing machine is not draining, it’s important to check if the lid switch is working correctly.
• Here are a few signs that the lid switch may be faulty:
• The machine does not start or stop when the lid is opened.
• The machine does not drain water, even though the lid is closed.
• There are no clicking or humming sounds when the lid is opened or closed.

Follow the Step-by-Step Instructions for Testing and Replacing the Switch:

To test the lid switch, follow these steps:

• Unplug the washing machine from the power source for safety.
• Locate the lid switch, which is usually located near the door hinge or under the top panel of the machine.
• Disconnect the wires from the lid switch terminals.
• Use a multimeter set to the ohms (Ω) setting to test the continuity of the lid switch.
• Place one probe on each terminal of the lid switch.
• If the meter shows a reading of infinity, the lid switch is faulty and needs to be replaced.
• If the meter shows a reading close to zero, the lid switch is functioning properly.
• If the lid switch is faulty, you will need to replace it with a new one.
• Order the specific replacement lid switch for your Kenmore washing machine model.
• Follow the manufacturer’s instructions to install the new lid switch.
• Reconnect the wires to the terminals of the new lid switch.
• Put the machine back together, ensuring all screws and panels are securely in place.
• Plug the washing machine back into the power source.
• Test the lid switch by closing the lid and running a small cycle to see if the machine drains properly.

Remember to always refer to your specific Kenmore washing machine model’s manual for detailed instructions on how to test and replace the lid switch.

Following these steps should help you diagnose and potentially fix the issue of your Kenmore washing machine not draining due to a faulty lid switch.

Kenmore Washer Lid Switch Location

If your Kenmore washing machine is not draining, one possible reason could be a faulty lid switch. To locate the lid switch, you’ll need to remove the control panel, inspect and test the switch, and reinstall it if necessary. Once fixed, your washer should drain properly.

Locate the lid switch on your Kenmore washing machine.

• The lid switch is an important component in your Kenmore washing machine that plays a crucial role in the draining function. It ensures that the machine only operates when the lid is securely closed. To locate the lid switch on your Kenmore washing machine, follow these steps:
• Open the lid of your washing machine.
• Look for a small rectangular hole on the underside of the lid. This is where the lid switch is usually located.
• If you cannot find the lid switch in the rectangular hole, check the back of the control panel or the side of the washing machine cabinet.
• Once you locate the lid switch, make sure to inspect it for any signs of damage or wear.

Understand How the Lid Switch Affects the Draining Function:

• The lid switch in your Kenmore washing machine directly affects the draining function. Here’s how it works:
• When the lid is closed, the lid switch is engaged, allowing the machine to start the draining process.
• If the lid switch is broken or malfunctioning, the machine may not start the draining cycle even if all other components are functioning properly.
• A faulty lid switch can also cause the machine to stop draining midway through the cycle or not drain at all.
• If you are experiencing drainage issues with your Kenmore washing machine, checking the lid switch should be one of the first steps you take in troubleshooting the problem.

By understanding the location of the lid switch on your Kenmore washing machine and how it affects the draining function, you can effectively troubleshoot and resolve any drainage issues you may be experiencing.

Common Cause Of A Failed Lid Switch

A common cause of a failed lid switch in a Kenmore washing machine not draining is a kinked, twisted, or bent drain hose. Straightening out the hose and removing any obstructions can help resolve the issue.

Identify Common Reasons for Lid Switch Failure:

• The lid switch is an essential component in a Kenmore washing machine, responsible for detecting whether the lid is closed properly. Over time, this switch can become faulty or fail completely, leading to drainage issues. Here are some common causes of lid switch failure:
• Wear and tear: Like any mechanical part, the lid switch can wear out over time due to regular use. Continuous opening and closing of the lid can put stress on the switch and eventually cause it to malfunction.
• Misalignment: If the lid is not properly aligned with the switch, it may not activate when the lid is closed. This can lead to drainage problems as the machine may not recognize that the lid is shut.
• Physical damage: Accidental bumps or drops can damage the lid switch, causing it to malfunction. This can include broken wires, cracked switch housings, or loose connections.
• Moisture and rust: Exposure to moisture, such as leaks or spills, can lead to rust formation on the lid switch. Rust can interfere with the switch’s functionality, preventing it from working properly.

Learn How to Recognize the Symptoms of a Faulty Lid Switch:

• It’s important to identify the symptoms of a faulty lid switch to address the problem promptly. Here are some signs that indicate a malfunctioning lid switch:
• Washing machine not draining: One of the primary indicators of a faulty lid switch is when the washing machine fails to drain water properly. If the switch does not detect that the lid is closed, it may prevent the machine from initiating the drainage process.
• No spinning action: Another common symptom is when the washing machine does not spin after the wash cycle. The lid switch is designed to activate the spin cycle only when the lid is properly closed. A malfunctioning switch can inhibit this action.
• Inoperative controls: Sometimes, a faulty lid switch can cause the washing machine’s controls, such as buttons and dials, to become unresponsive. This is because the machine may think that the lid is still open, preventing any further operations.
• Strange noise: If you notice an unusual noise coming from the washing machine during the wash or spin cycle, it could indicate a faulty lid switch. The switch failing to engage or disengage properly can cause motor- or pump-related noises.

By familiarizing yourself with the common causes of a failed lid switch and recognizing the symptoms of a faulty switch, you can take appropriate measures to resolve the issue and get your Kenmore washing machine back to its optimal functioning.

Address Vmw Error Codes

If your Kenmore washing machine is not draining, there are a few steps you can take to resolve the issue. First, check the drain hose for any kinks or obstructions, and straighten or remove them if necessary. You can also manually drain the water by locating the valve or pump and opening it counterclockwise.

Understand Different Error Codes Associated With VMW Washing Machines:

• F1: This error code indicates a water supply issue. Make sure the water valves are fully open and there are no kinks in the inlet hoses.
• F9: This error code means there is a drain problem. Check if the drain hose is clogged or if the drain pump is faulty.
• F2: This error code points to a problem with the motor control unit. It could be due to a faulty motor, a broken wiring harness, or a malfunctioning control board.
• F6: This error code indicates an issue with the motor or the motor control unit. Check for any loose connections or damaged wiring.

Troubleshoot specific error codes related to drainage Issues:

• F9E1: This error code indicates a long drain time. It could be caused by a clogged drain hose, a faulty drain pump, or a problem with the water level pressure switch.
• F9E2: This error code means the drain pump is running continuously. Check for any obstructions in the drain hose or pump, and make sure the drain pump is working properly.
• F9E3: This error code points to a drain pump system error. Inspect the drain pump and its components for any damage or malfunction.
• F9E4: This error code indicates a slow drain time. Check for any clogs in the drain hose or debris in the drain pump.

Remember to always refer to the user manual or contact a professional technician if you are unsure about troubleshooting these error codes.

Fix Washer Stuck In Neutral Drain

If your Kenmore washing machine is not draining, first check the drain hose for any kinks or obstructions. Straighten out any bends in the hose and remove any blockages. If the issue persists, you may need to replace the drain pump or lid switch.

Is your Kenmore washing machine not draining properly? One possible cause for this issue is a washer stuck in the neutral drain. When the washer gets stuck in this mode, it fails to drain the water from the tub, leaving your laundry soaked and unwashed.

In this section, we will explore the causes of a washer stuck in a neutral drain and how to test and fix the timer to resolve this issue.

Identify the Causes of a Washer Stuck in the Neutral Drain:

• Timer malfunction: The timer is responsible for controlling the various cycles of the washing machine. If it malfunctions, it can get stuck in the neutral drain position, causing the washer to not drain.
• Wiring issues: Loose or damaged wiring connections can disrupt the signals sent by the timer, leading to a washer stuck in the neutral drain.
• Faulty lid switch: The lid switch is a safety feature that prevents the washer from draining while the lid is open. If the lid switch is faulty, it may not send the proper signals to the timer, causing the washer to get stuck in the neutral drain.

Learn How To Test And Fix The Timer To Resolve This Issue:

• Unplug the washing machine: Before attempting any repairs, always make sure to unplug the washing machine from the power source to ensure your safety.
• Access the timer: Depending on the model of your Kenmore washing machine, the timer may be located on the control panel or behind the front panel. Consult your owner’s manual or online resources for instructions on accessing the timer.
• Test the timer: Use a multimeter to test the continuity of the timer. If it fails the continuity test or shows signs of damage, it may need to be replaced.
• Replace the timer: If the timer is found to be faulty, remove it from the washing machine and install a new one. Make sure to follow the specific instructions provided by the manufacturer.
• Test the washing machine: Once the new timer is installed, plug in the washing machine and test it to ensure that it is no longer stuck in the neutral drain. Run a cycle and verify that the water drains properly.

By following these steps, you can effectively diagnose and fix a washer stuck in a neutral drain. Remember to exercise caution and refer to the manufacturer’s instructions throughout the process.

Additional Troubleshooting Tips

If your Kenmore washing machine is not draining, there are some troubleshooting tips you can follow. Check the drain hose for any kinks or obstructions, and straighten it out if needed. Additionally, remove the drain hose and clear any obstructions.

If you’re still facing issues with your Kenmore washing machine not draining, there are a few more troubleshooting tips you can try. These tips will help you investigate if there are any problems with the timer or motor.

• Test the timer and motor to ensure they are functioning properly:
• Start by checking the timer. If the timer is faulty, it may not be sending the right signals to the motor, affecting the draining process. To test the timer:
• Set the washing machine to the spin cycle and wait for the draining process to begin.
• If you notice that the timer is not advancing or if it gets stuck, there may be an issue with the timer that needs to be addressed.
• Consider consulting the user manual or contacting a professional repair service to assess and possibly replace the faulty timer.
• If the timer seems to be working fine, the next step is checking the motor. A malfunctioning motor could be the root cause of the drain issue. To test the motor:
• Ensure that the washing machine is unplugged for safety purposes.
• Access the motor by removing the back or front panel, depending on your specific Kenmore model.
• Look for any visible signs of damage or overheating, such as burned wires or melted plastic components.
• Using a multimeter, check the motor’s winding resistance to determine if it falls within the manufacturer’s specified range. If the resistance is outside the range, it may indicate a faulty motor.
• If you are unfamiliar with using a multimeter or if you find any issues during the motor inspection, it is recommended to seek professional assistance to diagnose, repair, or replace the motor.

Explore Alternatives If The Motor Won’t Run Even With The Lid Switch Bypassed:

If you have attempted to bypass the lid switch and the motor still won’t run, there are a few alternative steps you can take to address the issue. These alternatives include:

• Check the power supply: Ensure that the washing machine is receiving adequate power. Verify that the power outlet is functioning by testing it with another device or appliance.
• Examine the wiring: Inspect the wiring connections between the power supply, motor, and timer. Loose or damaged wires can disrupt the proper functioning of the motor. If any issues are found, consult a professional or refer to the user manual for guidance on how to properly repair or replace the wiring.
• Seek professional assistance. If you have exhausted all possible troubleshooting steps and the motor still won’t run, it may be time to enlist the help of a professional repair service. They have the knowledge and expertise to diagnose and fix complex washer issues efficiently.

By following these additional troubleshooting tips, you can gather more information about the potential causes of your Kenmore washing machine not draining and explore alternative solutions to get it up and running smoothly again.

Find Kenmore Washing Machine Parts

If your Kenmore washing machine is not draining, you can find the necessary parts to fix it in Austin, Texas. Check the drain hose for kinks or obstructions, and straighten it out if necessary. Make sure to remove any obstructions from the hose as well to ensure proper drainage.

Locate and acquire the necessary parts for your Kenmore washing machine.

• Lid switch replacement:
• The lid switch is a crucial component that ensures the washing machine stops when the lid is opened. If your Kenmore washing machine is not draining, a faulty lid switch might be the cause. You can find a compatible lid switch for your specific model by following these steps:
• Identify the model number of your Kenmore washing machine. The model number is usually located on a tag or sticker inside the door or on the back of the machine.
• Visit the official Kenmore website or authorized parts retailer.
• Enter the model number in the search bar and browse through the available lid switches.
• Check the specifications and compatibility with your washing machine before making a purchase.
• Place an order and wait for the shipment to arrive.
• Remember to disconnect the power supply and follow proper safety precautions when replacing the lid switch.
• Drain pump replacement:
• A malfunctioning drain pump can prevent your Kenmore washing machine from draining properly. To replace the drain pump, follow these steps:
• Identify the model number of your Kenmore washing machine.
• Visit the official Kenmore website or authorized parts retailer.
• Enter the model number in the search bar and browse through the available drain pumps.
• Verify compatibility with your specific model and check the specifications of the drain pump.
• Place an order for the drain pump and await delivery.
• Ensure to disconnect the power supply and follow proper safety precautions when replacing the drain pump.

Remember, it’s essential to choose the right parts for your Kenmore washing machine model to ensure compatibility and proper functioning. Follow the instructions provided by the manufacturer or seek professional assistance if needed.

Kenmore Washer Lid Switch Assembly Replacement

If your Kenmore washing machine is not draining, one possible solution is to replace the lid switch assembly. First, check the drain hose for any obstructions and straighten it if necessary. Then, locate the lid switch assembly and follow the steps to remove and replace it. This should help resolve the draining issue.

Follow the Step-by-Step Instructions to Replace the Lid Switch Assembly:

Replacing the lid switch assembly on your Kenmore washing machine is a relatively simple process. By following these step-by-step instructions, you’ll be able to complete the task quickly and effectively. Here’s what you need to do:

• Disconnect power.wer: Before starting any repair work, always make sure to unplug the washing machine from the power source. This will ensure your safety throughout the process.
• Locate the lid switch: Open the washer’s lid and locate the lid switch assembly. It is usually located near the edge of the lid opening and is connected to a wire harness. Take note of its position for future reference.
• Remove the control panel: To access the lid switch assembly, you’ll need to remove the control panel. Look for screws or fasteners on the rear or sides of the control panel, and use a screwdriver or nut driver to remove them. Once removed, lift up and flip the control panel backward.
• Disconnect the wire harness: Inside the control panel, you’ll find the wire harness connected to the lid switch assembly. Carefully disconnect the wire harness by gently pulling it apart. Take note of the connection points for reassembly.
• Remove the old lid switch: With the wire harness disconnected, you can now remove the old lid switch assembly. Depending on your washer model, it may be secured with screws, clips, or other fasteners. Use the appropriate tools to detach and remove it.
• Install the new lid switch: Take the new lid switch assembly and position it in the same location as the old one. Secure it in place using screws or clips, making sure it is firmly attached.
• Reconnect the wire harness: Take the disconnected wire harness and reconnect it to the new lid switch assembly. Ensure that the connection is secure and snug.
• Reinstall the control panel: Flip the control panel back into place and use the screws or fasteners to secure it. Make sure that it is aligned properly and flush with the rest of the machine.
• Test the lid switch: Once everything is reassembled, plug the washing machine back into the power source. Close the lid and run a test cycle to check if the new lid switch assembly is functioning correctly. Ensure that the machine properly starts, stops, and drains as expected.
• Ensure proper installation and testing afterward:
• Make sure all screws and fasteners are tightened to prevent any loose components.
• Double-check the wire connections to ensure they are securely in place.
• Test the lid switch assembly by opening and closing the lid during a wash cycle to ensure it activates and deactivates the machine correctly.
• Run a full cycle to confirm that the machine is draining properly.

By following these step-by-step instructions, you’ll be able to successfully replace the lid switch assembly on your Kenmore washing machine. Remember to prioritize safety by disconnecting the power before starting any repair work.

Washer Agitator Dogs Cam Kit Aftermarket Replacement

If your Kenmore washing machine is not draining, consider replacing the washer agitator dog cam kit with an aftermarket replacement. Check the drain hose for any obstructions and make sure it is not kinked or twisted. Straighten the drain hose if necessary.

Understand The Purpose Of Agitator Dogs In Your Kenmore Washing Machine:

• Agitator dogs are small plastic gears located in the agitator of your Kenmore washing machine.
• They are responsible for the back-and-forth motion of the agitator during the wash cycle.
• Agitator dogs engage with the agitator cam, allowing it to rotate in one direction and preventing rotation in the other direction.

Learn How To Replace The Agitator Dogs Cam Kit With Aftermarket Options:

• Start by unplugging the washing machine and removing the agitator cap.
• Use a socket wrench to remove the bolt securing the agitator to the drive shaft.
• Lift the agitator out of the washing machine.
• Locate the agitator dogs and remove them from the agitator cam.
• Install the new agitator dogs from the aftermarket kit onto the agitator cam, making sure they are inserted correctly.
• Reassemble the agitator by placing it back onto the drive shaft and securing it with the bolt.
• Replace the agitator cap and plug in the washing machine.
• Test the washing machine to ensure that the agitator is rotating properly.

Remember to refer to the specific instructions provided with your aftermarket agitator dogs cam kit for detailed steps and any additional tools required.

Kenmore Washer Drain Pump Replacement

Is your Kenmore washing machine not draining? Don’t worry, we’ve got you covered. Start by checking the drain hose for any kinks, twists, or obstructions. Straighten the hose if needed and remove any blockages. If the problem persists, it might be time to consider a Kenmore washer drain pump replacement.

Our experts at Repair Clinic can help you with step-by-step instructions and all the necessary parts. Don’t let a clogged drain ruin your laundry day.

Is your Kenmore washing machine not draining properly? One common culprit could be a faulty drain pump. The drain pump is responsible for pushing out the water from the machine during the draining cycle. If it malfunctions, you may notice that your washer is not draining or spinning as it should.

In this section, we will identify the signs of a faulty drain pump and provide a detailed guide for replacing it with a new one.

Identify Signs Of A Faulty Drain Pump In Your Kenmore Washer:

• Water not draining: If you find that the water is not draining from your Kenmore washer, it could be due to a faulty drain pump. The pump may be clogged or damaged, preventing the water from being pushed out of the machine.
• Strange noises during draining: If you hear unusual noises, such as grinding or buzzing, while your washer is draining, it could indicate a problem with the drain pump. The pump may be struggling to operate correctly, causing these sounds.
• Water leaking from the machine: A faulty drain pump can also lead to water leaking from your Kenmore washer. If you notice any water pooling underneath the machine or leaking from the pump itself, it’s likely that the pump needs to be replaced.

Follow A Detailed Guide For Replacing The Drain Pump With A New One:

• Preparation:
• Disconnect the power supply: Before starting any repair work, ensure that the power supply to the washer is turned off and unplugged.
• Gather the necessary tools: You will need a screwdriver, pliers, and a replacement drain pump specifically designed for your Kenmore washer model.
• Accessing the drain pump:
• Remove the front panel: Locate the retaining screws on the bottom of the front panel and remove them using a screwdriver. Gently pull the panel away to access the pump.
• Disconnect the hoses: Take note of the hoses connected to the drain pump. Using pliers, loosen the clamps and disconnect the hoses from the pump. Be prepared for some water to spill out when disconnecting the hoses.
• Removing the faulty drain pump:
• Disconnect electrical connections: Identify the electrical connections attached to the drain pump, such as wires or connectors. Carefully disconnect them, making sure not to damage any wires in the process.
• Remove the mounting screws: Locate the screws attaching the pump to the washer’s base or frame. Use a screwdriver to remove these screws and detach the pump from the machine.
• Installing the new drain pump:
• Position the new pump: Place the new drain pump in the same position where the old one was removed. Align it properly and secure it with the mounting screws.
• Reconnect electrical connections: Attach the wires or connectors back onto the new drain pump, ensuring a secure connection.
• Reconnect the hoses: Slide the hoses back onto the connections of the new pump and tighten the clamps with pliers.
• Reassembling the washer:
• Put the front panel back in place: Line up the front panel with the slots on the washer and push it in until it snaps into position. Secure the panel with the retaining screws.
• Restore power supply: Plug the washer back into the power source and turn on the power supply.

Following this step-by-step guide should help you effectively replace the drain pump in your Kenmore washer. Remember to exercise caution and refer to your appliance’s manual for any specific instructions or troubleshooting tips.

Whirlpool Kenmore Fsp Washer Parts

If your Kenmore washing machine is not draining, there are a few steps you can take to fix the issue. First, check the drain hose for any kinks or obstructions. Straighten the hose if needed and remove any blockages. If the problem persists, you may need to replace the drain pump.

Access Genuine Whirlpool Kenmore Fsp Washer Parts

If your Kenmore washing machine is not draining properly, it may be time to replace some parts. Here is a guide on where to access genuine Whirlpool Kenmore FSP washer parts:

• Visit the official Whirlpool website: The Whirlpool website offers a wide range of replacement parts for your Kenmore washing machine. Simply search for your specific model and browse through the available parts.
• Check with authorized dealers: Visit authorized dealers or retailers that specialize in Whirlpool or Kenmore appliances. They often carry genuine FSP washer parts and can help you find the right one for your model.
• Online marketplace platforms: Online platforms such as Amazon or eBay also offer Whirlpool Kenmore FSP washer parts. Make sure to read reviews and choose reputable sellers to ensure you’re getting genuine parts.

Remember, using genuine Whirlpool Kenmore FSP washer parts ensures compatibility and quality, giving you peace of mind that your washing machine will be back to its optimal performance.

Whirlpool Washing Machine Drain Pump Replacement

If your Kenmore washing machine is not draining, it may be time to consider a Whirlpool washing machine drain pump replacement. Check the drain hose for any kinks, twists, or obstructions, and straighten or remove them accordingly. With a new drain pump, you can ensure proper water drainage and keep your machine running smoothly.

Learn How To Replace The Drain Pump In A Whirlpool Washing Machine:

If you’re experiencing issues with your Whirlpool washing machine not draining properly, it might be time to replace the drain pump. Follow this step-by-step guide for a successful installation:

Step 1: Gather The Necessary Tools

Before starting the replacement process, make sure you have the following tools ready:

• Screwdriver
• Pliers
• Bucket or towels
• Replacement drain pump

Step 2: Unplug The Washing Machine

To ensure your safety, always unplug the washing machine from the power source before starting any repair or replacement work.

Step 3: Access The Drain Pump

Locate the drain pump, which is usually located at the back or bottom of the machine. Remove any screws or panels to access the pump.

Step 4: Disconnect The Hoses

Using pliers, grip the clamps securing the hoses to the drain pump and slide them off. Be prepared for any excess water to drain out, so have a bucket or towels ready to catch it.

Step 5: Remove The Drain Pump

Once the hoses are disconnected, remove any screws or clips holding the drain pump in place. Carefully pull the pump out of its housing.

Step 6: Install The New Drain Pump

Take the new drain pump and align it with the housing. Secure it in place using the screws or clips that were removed during the previous step.

Step 7: Reconnect The Hoses

Attach the hoses back onto the drain pump, ensuring they are securely fastened with the clamps. Double-check that the connections are tight to prevent any leaks.

Step 8: Test The Replacement

Plug the washing machine back into the power source and test the replacement drain pump. Run a short cycle to see if the machine is draining properly.

Step 9: Reassemble The Machine

Once you have confirmed that the new drain pump is working correctly, reassemble any panels or screws that were removed earlier to access the pump.

Step 10: Clean Up And Maintenance

Dispose of any remaining water and clean up any spills or messes that occur during the replacement process. Additionally, perform regular maintenance on your washing machine to prevent future drainage issues.

By following these step-by-step instructions, you can easily replace the drain pump in your Whirlpool washing machine. Remember to always prioritize safety and consult the manufacturer’s manual if you have any specific questions or concerns.

Frequently Asked Questions

Why Is My Kenmore Washing Machine Not Draining?

If your Kenmore washing machine is not draining, check the drain hose for any kinks, twists, or obstructions. Straighten the hose and remove any blockages if found.

How Do I Force My Kenmore Washer To Drain?

To force your Kenmore washer to drain, follow these steps: 1. Check the drain hose for any obstructions or bends and straighten it out if needed. 2. Remove the drain hose and clear any obstructions that you find. 3. Locate the manual drain valve or pump and place a container or towel underneath it.

4. Open the manual drain valve by turning it counterclockwise to release the water from the machine. Make sure to take precautions to prevent any water spills during the draining process.

Why Is There Standing Water In My Kenmore Washing Machine?

There may be standing water in your Kenmore washing machine due to a bent or obstructed drain hose. Straighten or remove the hose to resolve the issue.

How Do You Fix A Kenmore Washer That Won’t Drain Or Spin?

To fix a Kenmore washer that won’t drain or spin, first check the drain hose for any kinks, twists, or obstructions. Straighten the hose and remove any obstructions if found. Additionally, locate the manual drain valve and open it counterclockwise to release the water.

If the problem persists, there may be an issue with the pump motor, and it may need to be repaired or replaced.

How Do I Fix A Kenmore Washing Machine That Won’t Drain?

There are a few steps you can take to fix a Kenmore washing machine that won’t drain. First, check the drain hose for any obstructions or kinks. Straighten out the hose if necessary. If that doesn’t work, try removing the drain hose and checking for any clogs.

Finally, check if the drain pump is functioning properly. If none of these solutions work, it might be time to call a professional.

Conclusion

If your Kenmore washing machine is not draining, there are a few simple steps you can take to troubleshoot the issue. Start by checking the drain hose for any kinks, twists, or obstructions, and straighten or remove them as necessary.

Additionally, make sure that the drain hose is properly connected to the machine and that there are no leaks. If these steps do not resolve the problem, you may need to manually drain the water by locating the valve or pump and opening it counterclockwise.

It’s important to place a container or towel underneath to catch any water that may spill out. If you have followed these steps and the issue persists, there may be a problem with the pump motor, and it’s recommended to seek professional assistance.

By following these guidelines, you can effectively address the draining issue in your Kenmore washing machine.