Kenmore Series100 Washer Lid Lock Bypass: Best Hack

To bypass the lid lock on a Kenmore Series 100 washer, you can use a magnet to activate the switch located on the top of the lid. With this simple trick, you can bypass the lid lock and use your washer normally.

If you own a Kenmore Series 100 washer, you may have experienced issues with the lid lock mechanism. This feature will prevent the washer from working if the lid is not closed correctly, but sometimes it can be more of a hindrance than a help.

For instance, if the switch is not functioning correctly, your washer will refuse to work no matter how many times you close the lid. Fortunately, there is a simple trick to bypass the lid lock and use your washer normally. This article will explain how to do it step by step.

Understanding The Kenmore Series 100 Washer And Its Lid Lock

If you own a Kenmore Series 100 washer, you may have encountered the lid lock mechanism. While it serves as a safety feature, the lid lock can cause issues like the machine not starting or stopping mid-cycle. In this blog post, we’ll discuss the Kenmore Series 100 washer and its lid lock, and explain why bypassing the lid lock can be helpful.

Introduction To The Kenmore Series 100 Washer

Kenmore Series 100 washers are popular brands that are well-known for their quality and durability. Here are some key points to keep in mind about this washer:

• It is a top-loading washing machine that has a 3.5-cubic-foot capacity.
• The machine comes with various features, such as multiple wash cycles, temperature control, and water level settings.
• The lid lock is a safety feature that prevents the washer from starting when the lid is open.

The Purpose And Function Of The Lid Lock

The lid lock mechanism is a safety feature that ensures that the washer doesn’t run with an open lid, which can lead to accidents and injuries. Here are some things to keep in mind about the lid lock:

• The lid lock mechanism is an electrical component that is activated when the lid is closed.
• When it is activated, it prevents the machine from starting or stops the machine mid-cycle if the lid is opened.
• The lid lock mechanism consists of a switch and a solenoid. When the lid is closed, the switch is activated, and the solenoid locks the lid.

Why Bypassing The Lid Lock Can Be Helpful

While the lid lock mechanism is a useful safety feature, it can sometimes cause issues. Here are some reasons why you might want to bypass the lid lock:

• If the lid lock is faulty, it can prevent the machine from starting or stopping it mid-cycle. Bypassing it can help you continue using the washer until you can get it repaired.
• Some people prefer to bypass the lid lock to add more clothes or detergent mid-cycle.
• If you’re using the washer for non-standard purposes (such as to wash pet bedding), bypassing the lid lock can give you more control over the machine.

Overall, while bypassing the lid lock mechanism should only be done with caution and when necessary, it can be a helpful solution to some common issues with the Kenmore Series 100 washer.

Safety First: Precautions And Tools You’ll Need

Kenmore Series 100 Washer Lid Lock Bypass

Are you tired of being unable to open your Kenmore Series 100 washer because of a malfunctioning lid lock? Don’t worry; you’re not alone. The good news is that you can bypass the lid lock yourself with these simple steps.

However, safety must be a top priority to avoid any hazards.

Precautions To Take Before Attempting Bypass

Before you start bypassing the lid lock on your Kenmore Series 100 washer, there are a few important precautions you must take to ensure your safety:

• Unplug the power cord to prevent an electric shock.
• Turn off the water supply and disconnect the hoses to avoid any water damage.
• Wear protective gloves to prevent any injury.

What You’ll Need To Bypass The Lid Lock

To bypass your Kenmore Series 100 lid lock, you’ll need a few tools, including:

• Screwdriver (Phillips and flathead)
• Pliers
• Wire strippers

Step-By-Step Instructions For Removing The Lid Lock

Follow these simple steps to remove the lid lock and bypass it:

• Use a Phillips screwdriver to remove the screws holding the control panel in place.
• Next, use the flathead screwdriver to detach the retaining clips on the control panel’s bottom side.
• Unplug the wire connectors that connect the lid lock to the washer’s control board.
• Use pliers to remove the spring clamp holding the rubber door gasket in place.
• Carefully remove the gasket and set it aside.
• Use wire strippers to strip a small section of the wire coverings connected to the lid lock.
• Twist the two exposed wires together to short-circuit the lid lock.
• Reassemble the rubber door gasket and the spring clamp.
• Reconnect the wire connectors that connect the lid lock to the washer’s control board.
• Snap the control panel back in place using the retaining clips.
• Finally, secure the control panel in place with the Phillips screws.

By following these simple steps, you can easily bypass the lid lock on your Kenmore Series 100 washer. Remember to follow the necessary safety precautions and use the required tools to avoid any mishaps.

Bypassing The Lid Lock: A Step-By-Step Guide

If you own a Kenmore Series 100 washer, you may sometimes find it frustrating to be locked out when the lid won’t unlock. While the lid lock is an important safety feature, it can also cause inconvenience at times.

Fortunately, bypassing the lid lock is a simple process if you know what you’re doing. In this guide, we’ll show you how to bypass the lid lock on your Kenmore series 100 washer in six easy steps.

Step 1: Unplug The Washer

Safety is key. Before you begin any work on your washing machine, it is essential to unplug it from the power source. This will prevent any risk of electrocution.

Step 2: Remove The Control Panel

To bypass the lid lock, you need to be able to access the lock mechanism. To do this, you’ll need to remove the control panel on the top of the washer. This is a relatively simple process – just locate the screws on the back of the panel and unscrew them.

You should then be able to lift the panel off.

Step 3: Locate The Lid Lock Wires

Once you have removed the control panel, you should be able to see the inside of the washing machine. Look for the lid lock mechanism; it will be connected to two sets of wires.

Step 4: Disconnect The Lid Lock Wires

The critical part of bypassing the lid lock is disconnecting the wires. You need to remove the wires from the lid lock mechanism and reconnect them to each other. To do this, unplug the two sets of wires from the lock.

Once you have done this, you need to connect the two sets of wires to each other using a wire nut.

Step 5: Connect The Wires And Replace The Control Panel

Now that you have connected the two sets of wires, you can replace the control panel. Screw it back into place using the screws you removed earlier.

Step 6: Test Your Washer

The final step is to test your washer. With the wires connected, the lid lock will no longer function as intended. Test your washer by running a cycle, making sure that it is functioning correctly. If it is, you have successfully bypassed the lid lock!

Bypassing the lid lock on your Kenmore Series 100 washer is a simple process. With the right tools and knowledge, you can bypass the lock in just a few minutes. Remember to always put safety first, and if you are unsure about anything, seek the help of a professional.

Troubleshooting And FAQs

Kenmore Series 100 washers are reliable investments for laundry needs. It is equipped with a lid lock safety feature that ensures safety during the cycle. However, there may be times when you need to bypass the lid lock for various reasons.

In this blog post, we will discuss troubleshooting and FAQs related to the Kenmore Series 100 washer lid lock bypass.

Common Issues When Bypassing The Lid Lock And How To Fix Them

• Lid lock light flashing
• Turn off the power and wait a few minutes before turning it on again.
• Check the wiring connections, fix any loose connections.
• Replace the lid lock switch if necessary.
• The washer won’t start
• Check the power source, make sure it is properly plugged in.
• Ensure the lid is fully closed before attempting to start the washer cycle.
• Check the lid lock mechanism, if it’s not working, replace it.
• The washer stops during the cycle
• Check for unbalanced loads, and redistribute the laundry evenly.
• Clean the drain filter, if it’s clogged, causing the washer to stop working.
• Check if the lid is closed correctly. If not, adjust the lid and try again.

Faqs About Bypassing The Lid Lock And Using Your Kenmore Series 100 Washer

• Q. Can i bypass the lid lock permanently?
• A. No, you cannot bypass the lid lock permanently. It’s a safety feature that ensures that the washer doesn’t start unless the lid is closed completely.
• Q. How do i bypass the lid lock on my Kenmore series 100 washer?
• A. You can bypass the lid lock by installing a lid lock bypass plug that can be purchased online or from a local appliance store. Alternatively, you can directly connect the wires of the lid lock switch.
• Q. Is it safe to bypass the lid lock?
• A. bypassing the lid lock can compromise the safety feature of the washer. It’s recommended to use the lid lock feature when using your Kenmore series 100 washer.
• Q. Will bypassing the lid lock affect the warranty of my Kenmore series 100 washer?
• A. Yes, bypassing the lid lock can void the warranty of your Kenmore series 100 washer.
• Q. Why is my lid lock not working?
• A. The lid lock switch may be faulty or loose wiring connections. If the issue persists, it may be time to replace the lid lock switch.
• Q. Is it necessary to bypass the lid lock on my Kenmore series 100 washer?
• A. No, bypassing the lid lock is not necessary unless there is an issue with the lid lock switch.

Frequently Asked Questions On Kenmore Series 100 Washer Lid Lock Bypass

Conclusion

After going through the step-by-step process of Kenmore series 100 washer lid lock bypass, it’s evident that you don’t have to spend hundreds of dollars replacing a lid lock switch. By bypassing the lid lock, you can save time, and money and get your washing machine working faster.

It’s important to note that safety should always come first when carrying out any repairs. Ensure to unplug the machine before commencing the process and only proceed if you’re confident in your ability to follow through with the steps. Remember to handle the washing machine with care and avoid slamming the lid shut to prevent any future damage.

With this guide, the process should be straightforward and you can get back to your laundry routine within no time. Now, it’s time to enjoy the benefits of a fixed appliance and the convenience it brings.