Amana Washer Won’t Drain: Troubleshooting

If your Amana washer won’t drain, it may be due to a kinked or clogged drain hose. Make sure the hose is straightened and free of any blockages.

You can also try removing the drain hose and checking for obstructions. If these troubleshooting steps do not resolve the issue, it may be necessary to replace the drain pump or seek professional assistance.

Common Causes Of Drain Issues

Is your Amana washer not draining? There can be several reasons for this issue, including a selected delicate or handwash cycle, a low spin option, or washing one bulky item. Make sure to check for these common causes and troubleshoot accordingly.

The spin option was selected. Washing one bulky item.

Delicate or handwash cycle selected:

• The delicate or handwash cycle on your Amana washer is specifically designed to be gentle on delicate fabrics. However, this cycle uses less water and spins at a slower speed, which can sometimes result in drainage issues.
• When the washer doesn’t drain properly on the delicate or handwash cycle, it could indicate that there is an obstruction or buildup in the drainage system. This could include lint, fabric debris, or even foreign objects like coins or small items that got caught in the drain pump.
• To fix this issue, you can check the drainage hose for any kinks or clogs and remove any visible blockages. You may also need to clean out the drain pump filter or, in extreme cases, replace the pump altogether.

Extra Low, Low, or No Spin Option Selected:

• Amana washers offer settings that allow you to choose the spin speed for your laundry. If you have selected the extra low, low, or no spin option, it may impact the drainage process.
• These spin options are useful for delicate items that require minimal to no spinning, but they can lead to drainage issues if used incorrectly. When the spin speed is set too low or completely turned off, the water may not be able to drain properly, resulting in a wet and soaked load at the end of the cycle.
• To resolve this issue, ensure that you select the appropriate spin speed for your laundry. If you need to wash delicate items, choose a gentle spin option, but avoid turning it off completely. This will allow the washer to remove excess water without causing drainage problems.

Washing one bulky item:

• Amana washers are designed to handle different load sizes, but washing a single bulky item can sometimes lead to drainage problems.
• When you wash a bulky item, such as a large comforter or a pair of heavy jeans, it can become unbalanced during the spin cycle. This imbalance can prevent the washer from draining properly.
• To avoid this issue, try adding a few similar-sized items to balance the load. You can also redistribute the weight inside the washer manually before starting the cycle. If the problem persists, you may need to wash the bulky item separately or take it to a laundromat with larger-capacity machines.

Remember, understanding the common causes of drain issues in your Amana washer can help you troubleshoot and resolve problems more effectively. By selecting the appropriate cycle and spin options and balancing the load, you can ensure that your washer drains properly and provides you with clean, dry clothes every time.

Check The Drain Hose

In order to troubleshoot an Amana washer that won’t drain, one important step is to check the drain hose. Ensure that the hose is not clogged, bent, or twisted, as this may prevent proper drainage. If there are any obstructions, try removing them to enable the water to drain effectively.

When your Amana washer won’t drain, one of the potential culprits could be a bent or clogged drain hose. Here are a few steps to follow to ensure your drain hose is not causing the issue:

• Inspect the hose: Check if the drain hose is bent or kinked. A bent hose can prevent proper water flow, resulting in a drainage issue. Straightening the hose might solve the problem.
• Unclog obstructions: Use a flashlight to look for obstructions in the drain hose. Sometimes lint, debris, or small objects can clog the hose and hinder water from flowing freely. If you find any clogs, carefully remove them to restore proper drainage.
• Ensure proper positioning. Check that the hose is positioned correctly. It should be inserted into the drain standpipe or laundry tub no more than 8 inches. If the hose is inserted too far or not far enough, it can cause drainage problems.
• Clean the filter: Some Amana washers have a filter located near the drain hose. If your model has one, remove it and clean out any dirt or debris that may have accumulated. A clogged filter can restrict water flow and prevent proper drainage.
• Test for leaks: After checking the drain hose, run a short wash cycle to check for leaks. Make sure there are no leaks around the hose connections or any other areas. Address any leaks promptly to avoid further issues.
• Consider using a drain cleaning tool. If none of the above methods work, you can try using a drain cleaning tool to remove any stubborn clogs in the hose. Follow the manufacturer’s instructions carefully when using the tool.

Once you have checked the drain hose and cleared any clogs or obstructions, run a complete wash cycle to see if the drainage issue is resolved. If the problem persists, it may be necessary to seek professional assistance or contact Amana customer support for further troubleshooting.

Troubleshooting The Drain Pump

If your Amana washer won’t drain, troubleshoot the drain pump by checking for any obstructions in the drain hose and ensuring it is not kinked or twisted. Consider replacing the pump or straightening the hose if necessary.

If your Amana washer won’t drain, the issue could be with the drain pump. Here are some steps to troubleshoot the drain pump and get your washer back up and running:

Disconnect the water lines.

• Turn off the water supply and unplug the washer from the power source.
• Locate the water lines that are connected to the washer.
• Disconnect the water lines by loosening the fittings and gently pulling them off.

Inspect the drain pump for any clogs or damage.

• Locate the drain pump, usually found at the bottom of the washer.
• Check the pump for any visible clogs or debris that may be obstructing the flow of water.
• Remove any clogs or debris using a pair of pliers or a small brush.

Reinstall the original pump if necessary.

• If you have determined that the drain pump is damaged and needs replacement, remove the old pump.
• Install the new pump by aligning it with the mounting bracket and securing it in place.
• Reconnect any electrical connections and water lines that were disconnected during the process.

By following these troubleshooting steps, you can identify and resolve any issues with the drain pump in your Amana washer. If the problem persists, it may be best to consult a professional technician for further assistance.

Remember to always refer to the manufacturer’s manual or seek guidance from authorized service centers for specific instructions related to your Amana washer model.

Other Possible Solutions

If your Amana washer won’t drain, there are several possible solutions to consider. First, check the drain hose for any obstructions and make sure it is not bent or twisted. You can also try resetting the washer or replacing the drain pump if needed.

Check the pump filter for any obstructions.

• Inspect the bottom front of your Amana washer to locate the pump filter.
• Use a screwdriver or your fingers to twist and remove the filter cap.
• Check for any debris or foreign objects that may be blocking the flow of water.
• Clear out any obstructions and clean the filter thoroughly.
• Once the filter is clean, reattach the filter cap securely.
• Run a test cycle to check if the washer drains properly now.

Inspect the drain for any blockages.

• Locate the drain hose at the back of your Amana washer.
• Check for any kinks or bends that may be obstructing the flow of water.
• If you find any issues with the drain hose, straighten it out and ensure it has a clear path for water to flow.
• If you suspect a blockage further down the drain line, detach the hose from the washer and inspect it for any clogs.
• Use a plumber’s snake or a wire coat hanger to remove any debris blocking the drain.
• Reattach the drain hose securely and run a test cycle to see if the problem is resolved.

Reset the washer’s control board if needed.

• Note that this step is only necessary if the previous solutions don’t resolve the issue.
• Unplug your Amana washer from the power source and wait for a few minutes.
• Plug the washer back in and press and hold the “Start” or “Cancel” button for 10 seconds.
• This should reset the control board and clear any error codes that may be preventing the washer from draining.
• After resetting the control board, run a test cycle to see if the washer now drains properly.

By following these steps, you can troubleshoot and potentially fix the issue of your Amana washer not draining. Remember to always refer to the manufacturer’s manual for specific instructions and safety precautions.

Replacing The Drain Pump

To replace the drain pump on your Amana washer that won’t drain, start by disconnecting the water lines, and then locate the drain pump. Remove the old pump and install the new one to fix the draining issue. Check out helpful videos and troubleshooting solutions online for step-by-step instructions.

Removing the Old Drain Pump:

• Disconnect the power supply and turn off the water valves.
• Locate the drain pump at the bottom of the washer.
• Remove the screws or clips holding the pump in place.
• Gently disconnect the wires and hoses from the pump.
• Carefully remove the old drain pump from the washer.

Install the new drain pump:

• Take the new drain pump and align it with the mounting holes.
• Connect the wires and hoses to the corresponding connectors on the pump.
• Secure the pump in place with screws or clips.
• Double-check all connections to ensure they are secure.

Test the washer to ensure proper drainage.

• Plug the washer back in and turn on the water valves.
• Run a test cycle to check if the new drain pump is functioning correctly.
• Observe the washer during the cycle to ensure there are no leaks or unusual noises.
• Check if the washer drains properly at the end of the cycle.

Remember to always consult the manufacturer’s instructions for specific guidance on replacing the drain pump of your Amana washer. If you are unsure or uncomfortable with the process, it is recommended to seek professional assistance.

Contacting Amana Support

If you’re struggling with your Amana washer not draining, troubleshoot and find solutions on websites like DoItYourself.com and Home Appliance Nerd. Watch YouTube videos from Fred’s Appliance and Appliance Parts Pros for step-by-step repair guides. Don’t let a clogged or bent drain hose ruin your laundry day in Austin, Texas.

If troubleshooting steps don’t resolve the issue:

If you have tried troubleshooting your Amana washer and it still won’t drain, it may be time to contact Amana Support for further assistance. Here are a few ways to reach out to them:

• Phone: Call Amana Support directly at [phone number] for immediate assistance. Their knowledgeable representatives can guide you through additional troubleshooting steps or help schedule a service appointment if needed.
• Online Support: Visit the Amana website and navigate to the support section. There you can find helpful articles, and manuals, and even chat with a technical support representative. This can be a convenient option if you prefer online assistance or have a non-urgent issue.
• Social Media: Amana may also have customer support channels on social media platforms like Twitter or Facebook. Reach out to them via direct message or by commenting on their posts. This can be a quick and easy way to get in touch and receive support.

Remember, contacting Amana Support is often the best course of action if basic troubleshooting steps don’t resolve the issue. They have the expertise to diagnose and address more complex problems with your washer.

Now that you know how to get in touch with Amana Support, don’t hesitate to reach out for further assistance if needed. They are there to help you get your washer back up and running smoothly.

Frequently Asked Questions

Why is my Amana washer not spinning or draining?

Common reasons for your Amana washer not spinning or draining could be selecting a delicate or handwash cycle, choosing an extra low, low, or no spin option, washing one bulky item, or having a bent or clogged drain hose. Verify the hose, unclog or straighten it if needed, and check for obstructions. Straightening the hose and removing any blockages should resolve the issue.

Why is my washing machine washing but not draining?

If your washing machine is washing but not draining, check the drain hose for any bends or clogs. Straighten or unclog the hose if necessary. It could also be a problem with the pump filter or the drained water returning to the drum.

How Do You Reset Amana Washer?

To reset your Amana washer, check the drain hose for any kinks or blockages. Straighten the hose for better water flow. If there are obstructions, remove them.

Why Won’t My Amana Front Load Washer Drain?

If your Amana front-load washer won’t drain, first check the drain hose for any kinks or obstructions. Straighten the hose and remove any blockages if present.

Why is my Amana washer not draining?

Common reasons for an Amana Front Load washer not draining include selecting a delicate or handwash cycle, choosing the Extra Low, Low, or No Spin option, or washing one bulky item.

Conclusion

If your Amana washer won’t drain, there are several common reasons that could explain the issue. One possibility is that a delicate or handwash cycle was selected, or the Extra Low, Low, or No Spin option was chosen. Another reason could be that you’re trying to wash a bulky item, which can throw off the balance and prevent proper draining.

Additionally, it’s important to check the drain hose for any kinks, twists, or obstructions that may be preventing water from flowing out. If necessary, straighten the hose or remove any blockages. Finally, make sure that the pump filter is clear and functioning properly.

By troubleshooting these potential problems, you can hopefully resolve the issue and get your Amana washer draining effectively once again.